DGMC-5-PT-GW-B-30VICKERS高壓齒輪泵說明,概述伊頓高壓齒輪泵

VICKERS高壓齒輪泵說明,概述伊頓高壓齒輪泵
? The improved new wear plate allows for easy changes in the direction of rotation of the pump in the field.
Open the pump, exchange drive gears and idler gears, change the

VICKERS高壓齒輪泵說明,概述伊頓高壓齒輪泵
Series 26 gear pumps are designed for retrofitting of B1 and B2 gear pumps.
Continuous - pumps can be operated continuously at these ratings.
++ intermittent - intermittent work, 10% per minute.
* 30.6 cm3 / rev. [1.87 in3 / rev.] Displacement, the highest continuous pressure is 190 bar [2750 PSI
++ 間歇 - 間歇工作, 每分鐘的10% 。
* 30.6 cm3/rev. [1.87 in3/rev.] 排量，zui高連續壓力是 190 bar [2750 PSI]
附加的軸伸、油口和安裝配置給了你需要的多種選擇，
便于轉換這種高性能的齒輪泵。
低噪聲工作
● 和以前的10 齒齒輪泵相比，現在的13 齒齒輪泵使流量
脈動降到zui小，降低了噪聲和振動。

VICKERS高壓齒輪泵說明,概述伊頓高壓齒輪泵
The use of oil into the oil tank instead of high pressure oil to improve the bearing lubrication system,
Increases volumetric efficiency for more power output.
● Highly finished shafts and gears improve mechanical efficiency,
旋轉方向現場反轉
安裝法蘭SAE A 2 螺栓
zui高連續壓力+ 210 bar [3000 PSI]
zui高間歇壓力 240 bar [3500 PSI]
在連續壓力下的zui低轉速750 RPM
在0壓力下的zui大旋轉扭矩4 Nm [36 lb-in]
zui高連續工作溫度105°C [220 °F]
連續工作時的zui低油液粘度5.7 cSt [45 SUS]
zui低工作溫度-29°C [-20°F]
在工作條件下的zui高進油口真空度0,8bar[11.6 psi]
● 困油槽溢流的改進不僅提高了功率，也使油流平穩來降低噪聲。
Reduced wear on these parts, extended pump life and improved pump reliability.
● The best trapped oil overflow area helps to reduce the pressure pulsation and low noise work,
This also reduces the input power requirements.
Site can be reversed