HSNH2200-42W1HSNH2200-42W1三螺桿泵、黃山泵業

HSNH2200-42W1三螺桿泵、黃山泵業

品牌：黃山天曼泵業

HSNH2200-42三螺桿泵HSNH2200-42N三螺桿泵   HSNH2200-42Z三螺桿泵    

HSNH2200-三螺桿泵   HSNH2200-42W1三螺桿泵  HSNH2200-42W1Z三螺桿泵

流量：1894.1L/min

壓力：1.0MPa

功率：40.3kw

轉速：1450r/min

驅動方式：電機驅動

進出口徑：200mm 、150mm

HSN系列三螺桿泵是軸向輸送容積式低壓轉子泵，它由特殊形狀曲線構成的螺旋型面，當主動螺桿轉動時，運動密封腔把液體從進口吸入并沿著軸向連續，無脈動地輸送到排出口，泵運轉平穩，噪音低；主、從桿的軸向力采用液壓平衡裝置，從桿由液壓力驅動旋轉，所以螺桿無磨損，使用壽命長；泵采用機械密封，無泄漏；結構簡單緊湊、效率高、具有很強自吸能力、節能效果好；且安裝、使用和維護方便。

HSN series three screw pump is axial delivery volume of low pressure rotor pump, screw it by special shapecurve surface, when the active screw rotation, moving sealing cavity the liquid from the suction along axis and no pulsation continuous, transported to the outlet, the pump running smoothly, low noise; the Lord, from the axialforce rod adopts the hydraulic pressure balance device, from the bar by the hydraulic pressure drive rotation, soscrew no wear, long service life; the pump with mechanical seal, no leakage; simple and compact structure, high efficiency, has the very strong self suction capability, good energy saving effect; and installation, convenient use and maintenance
HSNH系列三螺桿泵可輸送各種不含固體顆粒、無腐蝕性具有潤滑性的不同液體。介質粘度為3.0～760mm2/s，流量范圍11～3500L/min，zui高壓力4.0Mpa，zui高溫度150℃。廣泛適用于機械、石油、化工、冶金、電力、船舶和食品等行業。

HSNH series three screw pump can transport all kinds of not containing solid particles, different corrosive liquid with lubrication. The viscosity of the medium is 3 ~ 760mm2/s, flow rate range of 11 ~ 3500L/min, the maximum pressure of 4.0Mpa, the maximum temperature of 150 ℃. Widely used in machinery, petroleum,chemical, metallurgy, electric power, shipbuilding and food industry etc..

安裝尺寸The installation form
·部件組合系列化,有底板式、支架式、柱腳式多種結構?？捎糜谂P式（SNH）、法蘭式（SNF）和立式（SNS）安裝，泵進出口方向可左右更換。

· components series, a bottom plate, support type, column type structure. Can be used for horizontal （SNH）,flange type （SNF） and vertical （SNS） installation, pump inlet and outlet direction can be replaced or so.
·具有較強的自吸能力
With strong self-priming capacity
·可根據用戶特殊要求進行專門設計、生產。
according to customers special requirements of special design, production.
一、三螺桿泵/雙螺桿泵的價格說明：
three screw pump / double screw pump price deion:
同等價格比質量，同等質量比價格，同等價格比服務。產品的價格因素：材料設備工藝批量壽命服務品牌通用性企業團隊和管理效率物流方式路程遠近包裝材料的牢靠程度
The same price than quality, the same quality than price, the same price than service. The price factor products:solid material equipment process batch life service brand universal enterprise team and management efficiency of logistics mode of distance of packaging materials
二、HSNH三螺桿泵特點及優點
Pump characteristics and advantages of two, HSNH three screw

1.HSN系列三螺桿泵壓力和流量范圍寬闊，流量范圍0.2～320m3/h、工作壓力范圍0—4mpa；
1.HSN series three screw pump a wide range of pressure and flow, the flow range of 0.2 ~ 320m3/h, working pressure range of 0 - 4mpa;
2.運送液體的種類和粘度范圍寬廣,粘度范圍3mm2/s-760mm2/s；
2 the delivery of the liquid type and a wide range of viscosity, viscosity in the range of 3mm2/s-760mm2/s;
3.因為三螺桿泵內的回轉部件慣性力較低，故可使用很高的轉速，可選用（750r/min、950r/min、1450r/min、2900r/min、3400r/min）；
3 because of the rotary screw pump parts within three inertial force is low, it can use very high speed, can choose（750r/min, 950r/min, 1450r/min, 2900r/min, 3400r/min）;

4.吸入性能好，具有很強的自吸能力，（自吸高度范圍0.8m—8m）、10-NPSHr值，近似與泵的自吸高度。；
4 suction performance is good, has a strong self absorption capacity, （self-priming height range of 0.8m - 8m）, 10-NPSHr value, similar to the pump self-priming height. ;
5.流量均勻連續，振動小，噪音低，幾乎沒有脈動；
5 continuous uniform flow, small vibration, low noise, almost no pulse;
6.三螺桿泵結構堅實，安裝方便有（SNH臥式地腳安裝泵、SNH立式柱腳安裝泵、SNF法蘭安裝式泵、SNE插裝式泵組，從驅動側插入、SNT浸沒式泵）保養容易；
6 three screw pump solid structure, convenient installation （SNH horizontal anchor installation of pump, SNH vertical column installation of pumps, SNF flange mounted pump, SNE plug-in pump group, insert, from the driveside SNT submerged pump） easy maintenance;
7.三螺桿泵具有很強的耐熱性，一般工作溫度是（1~280°C）超過此溫度要在訂貨時說明，我們將為您定做您所需要的產品；
7 three screw pump has a very strong heat resistance, the general working temperature （1~280 ° C） over this temperature to note when ordering, we will provide you customize your required products;
8.根據所輸送介質需要還可提供加熱或冷卻結構；
8 according to the transmission medium to provide heating or cooling structure;
9.三螺桿泵幾乎沒有磨損，三螺桿泵只要選型正確，使用的壽命是很長的。
9 three screw pump almost no wear, three screw pump as long as the selection of the right, the use of life is very long.
10.三螺桿泵的工作效率高。

10 of the three screw pump with high efficiency.

地面驅動螺桿泵采油技術特點

Technical characteristics of screw pump ground driving
1） 螺桿泵屬于旋轉容積式泵，兼有離心泵和容積泵的優點，可以解決常規抽油泵的油稠，卡砂和氣鎖現象；

1） screw pump belongs to a rotary positive displacement pump, which has the advantages of centrifugal pump andthe volume of the pump, can solve the conventional pump heavy oil, sand and air lock phenomenon card;
2） 螺桿泵在不同壓力條件下流量改變很小，流量非常均勻；

2） screw pump under different pressure conditions flow change is small, traffic is very uniform;
3） 運動件很少（只有轉子一個運動件），流道短且簡單，過流面積大，油流擾動小，故攜帶能力強

3） moving parts （only a few rotor movement）, channel is short and simple, large flow area, the oil flow disturbanceis small, so the carrying capacity;
4） 采油生產投資費用低，對比常規抽油機，電動潛油泵等采油方式，螺桿泵結構簡單，一次性投資和維護費用zui低；

4） the production of low investment cost, compared with conventional pumping, electric submersible pump well,screw pump has the advantages of simple structure, one-time investment and maintenance cost;
5） 環境適應性強，適用于油稠、高含砂，高含氣等油井，使用占地面積小，安裝簡便。

5） strong environmental adaptability, suitable for heavy oil, high sand, oil wells with high gas containing, the use ofthe area is small, easy to install.

HSNH系列三螺桿泵產品簡介結構特點優勢說明

1、HSNH系列三螺桿泵產品概述簡介：

1、HSNH series three screw pump product brief introduction

    HSNH系列三螺桿泵是無脈動軸向輸送具有一定潤滑性介質的定量容積式低壓轉子泵，適于輸送燃料油、潤滑油、液壓油、礦物油等油類和具有潤滑性的流動性液體。所輸送的介質中不得含有任何磨料顆粒和對泵材料有腐蝕的物質。HSNH系列三螺桿泵由特殊型線（擺線）構成的螺旋型面，當電機或馬達驅動主動螺桿轉動時，其不斷運動的各個密封腔室逐漸形成真空，液體在大氣壓的作用下由吸入口吸入并沿軸向連續、無脈動的輸送到排出口，無攪拌、乳化現象。形成排出壓力的能力取決于系統負載和螺桿密封腔的數量，同時也與輸送介質的粘度以及驅動轉速也有一定的關系。

HSNH series three screw pump is quantitative volumetric type low-pressure rotor pump without pulsation of axial transport a certain lubricating medium, suitable for delivery of fuel oil, lubricating oil, hydraulic oil, mineral oil and other oil and fluid with lubricity. The transmission medium not containing any material abrasive particles andthe corrosion of pump material. The HSNH series three screw pump by special type line （cycloidal） spiral surface composed of, when the motor or motor driven active screw rotation, the constant movement of the sealing cavityformed in vacuum, the liquid under the action of atmospheric pressure by the suction port of the suction along the axial direction and continuous, no pulse pneumatic conveying to the outlet, without stirring, emulsifying phenomenon. The number of the formation of discharge pressure depends on the ability of the system load and screw seal cavity, and the transmission medium viscosity and driving speed also has a certain relationship.

      HSNH系列三螺桿泵的主動螺桿和從動螺桿采用液壓平衡裝置，被輸送的液體在泵腔內做連續、勻速的軸向直線運動，無脈動，噪音低，運轉平穩，流量壓力穩定，工作平穩，振動小。

HSNH series three screw pump adopts the hydraulic pressure balancedevice, liquid is transferred in the pump cavity continuous, uniform axial linear movement, no pulse, low noise,smooth operation, flow pressure is stable, stable work, small vibration

      HSNH系列三螺桿泵的零部件通用互換性好，可以任意拆解，更換相應的零部件。泵零件少，結構簡單，重量輕，安裝、使用、維修方便，效率高，壽命長。

HSNH series three screw pump has good compatibility, can be arbitrarily disassembled, replace the corresponding parts. Pump less parts, simple structure, light weight, installation, repair, convenient use, high efficiency, long life.

      三螺桿泵的從動螺桿的軸向力支撐在后蓋或主動螺桿上，并由液壓力驅動旋轉，從動螺桿由液壓力驅動，，主動螺桿和從動螺桿之間沒有機械接觸，螺桿之間，螺桿和泵套之間皆有油膜保護，因而螺桿型面僅傳遞液壓扭矩，并不受力，也無磨損和機械摩擦，對全部傳動零件而言，均由被輸送介質形成的油膜保護和潤滑。

The axial force of the three screw pump driven screw support at the back or the driving screw, and by the hydraulic pressure drive rotation, driven screw drive, by the fluid pressure, there is no mechanical contact, between the driving and driven screws between the screw, there is oil film protection between the screw and a pump sleeve, thescrew type surface only transfer fluid torque, no stress, no wear and mechanical friction, on all the transmissionparts, by the oil film to protect the transported medium formation and lubrication.

三螺桿泵的主桿的徑向旋轉跳動由平衡活塞套也可以叫滑動軸承定位，且借助于平衡活塞和軸套的間隙使高壓腔和密封腔分開，在密封腔內裝有機械密封，無泄漏，腔內的油液回油孔與泵的吸入腔相通，因而不受排出壓力的影響。

Three screw pump rod radial rotation beating by balancing piston sleeve can also be called sliding bearing positioning, and by the clearance between the piston and sleeve balance that high pressure chamber andseparate the sealing cavity, a sealing cavity in mechanical seal, no leakage, cavity of the oil return hole and pump suction cavity, thus not influenced by the discharge pressure.

具有很強的自吸能力，節能低耗，不需要底閥及每次開機前灌油。

Has a strong self absorption capacity, low energy consumption, without bottom valve and before each start filling.

組合系列化有多種結構，可用于臥式（H），法蘭式（F）和立式（S）浸油式（J）以及懸掛式（K）安裝。

Combined series has a variety of structure, can be used for horizontal （H）, flange type （F） and vertical （S） oil immersed type （J） and suspension （K） installation.

根據所輸送介質需要還可提供加熱或冷卻結構。

According to the transmission medium to provide heating or cooling structure.

對于潤滑性相對較差的介質，可以采用軸承外置結構（W1）以及金屬波紋管密封。保證三螺桿泵優良的使用壽命。

For the relatively poor lubrication medium, can be used with external bearing structure （W1） and metal bellows seal. To ensure the service life of three screw pump with good.

為了保護泵、電機和管路系統，泵必須帶有外置或內置安全閥裝置。

In order to protect the pump, motor and pipeline systems, the pump must be with external or internal safety valvedevice.
可輸送介質種類：

Transport medium

A  潤滑性液體：液壓油，礦物油，機械油潤滑油淬火油，齒輪油，變壓器油，汽輪機油，水乙二醇，原油，動植物油等

A lubricating liquid: hydraulic oil, mineral oil, mechanical oil lubrication oil quenching oil, gear oil, transformer oil,turbine oil, water, ethylene glycol, crude oil, animal and vegetable oil

B  低潤滑性液體：輕柴油，重柴油，燃油，燃料油，重油，渣油，含臘稀油，冷卻液，皂化液等

B low lubricating liquid: light diesel oil, heavy diesel oil, fuel oil, fuel oil, heavy oil, residual oil, oil, dilute waxsaponification liquid coolant, etc.

C  粘性液體：各種合成橡膠液，人造膠液，乳化液等

C viscous liquid: liquid synthetic rubber, synthetic glue, emulsion, etc.

HSNH三螺桿泵性能特點：

The performance characteristics of the three screw pump HSNH:

流量范圍：10～10000 L/min （升/分鐘） 0.6～620m3/h （立方/小時）

Flow range: 10 ~ 10000 L/min （L / min） 0.6 ~ 620m3/h （cubic meters / hour）

壓力范圍：0～4 Mpa（兆帕）0～40 ba-（巴） 0-40 kg/f （公斤力/平方厘米）

Pressure range: 0 ~ 4 Mpa （Zhao Pa） 0 ~ 40 ba- （BA） 0-40 kg/f （kg / cm2）

輸送介質粘度范圍：2-10000 cst（厘斯）

Medium viscosity range of delivery: 2-10000 CST （CST）

泵送溫度：300 ℃ （攝氏度）

Pumping temperature: 300 ℃ （Celsius）

容許zui高轉速：3600 -/min （轉/分鐘）

Allowable maximum speed: 3600 -/min （RPM）

公 司 名稱：

黃山天曼泵業有限公司

姓名：

程曉 （銷售 ） （）

辦 公 地址：

中國 黃山市徽州區城北工業園 

郵      編：

245400

電      話：

86-

傳      真：

86-

移 動 ：

郵      箱：

Hstmby01

：

阿 里 旺旺:

旺旺：hstmby01

公司主頁：

http;//www.hstmby.comhttp://www.luogb.com  http://www.cntmby.comhttp://www.tm-p.cc 

Company name: Mount Huangshan teamon pump industry limited company

Contact person: Mr. Cheng Xiao （Sales Manager） （）

Office address: China Huangshan City Huizhou area north of the City Industrial Park

Postal Code: 245400

86-

86-

phone:

: Hstmby01

: :

A: I want to: hstmby01

Company homepage: http; //www.hstmby.comhttp://www.luogb.com

                               http://www.cntmby.comhttp://www.tm-p.cc