Y、YKK系列高壓三相異步電動機是國家根據節能、優化、環保等原則大力推廣的新產品,我公司按照國家和行業的相關標準設計和開發了Y、YKK系列3KV、6KV、10KV多種型號的高壓三相異步電動機。
Y、YKK系列高壓三相異步電動機具有結構緊湊、重量輕,高效、節能、噪音低、振動小,可靠性高、使用壽命長,安裝維護方便等特點。
本系列電動機廣泛適用于各種通風機、水泵、破碎機、壓縮機、機床、運輸機械等無特殊要求的機械設備。是礦山、機電、石油、化工、電站等工礦企業重要的原動力設備。
本系列電機采用F級絕緣,溫升按B級絕緣考核,額定電壓3KV、6KV、10KV,額定頻率50Hz,基本安裝型式為臥式帶地腳(IMB3)結構,防護等級為IP23、IP44、IP54冷卻方式為IC01、IC11、IC21、IC31、IC611、IC616。
使用條件:
1、海拔不超過1000米。
2、環境空氣溫度,不超過40℃。
注:如電動機在海拔超過1000m或環境空氣溫度高于或低于40℃的條件下使用時,應按GB755-2008的規定。
3、環境空氣溫度:對采用滾動軸承的電動機為-15℃,對采用滑動軸承的電動機為0℃,或按協議。
4、月平均相對濕度為90%,同時該月的月平均溫度不高于25℃。
5、電動機運行期間電源電壓和頻率與額定值的偏差應按BG755-2008的規定。
Y, YKK series high-voltage three-phase asynchronous motor is a new product which is vigorously promoted by the state according to the principles of energy saving, optimization and environmental protection. Our company has designed and developed Y, YKK series 3KV, 6KV, 10KV high-voltage three-phase asynchronous motor according to the relevant national and industrial standards.
Y, YKK series high-voltage three-phase asynchronous motors have the characteristics of compact structure, light weight, high efficiency, energy saving, low noise, low vibration, high reliability, long service life, easy installation and maintenance.
This series of motors are widely used in all kinds of ventilators, pumps, crushers, compressors, machine tools, transport machinery and other mechanical equipment without special requirements. It is an important power equipment for mining, electromechanical, petroleum, chemical, power plant and other industrial and mining enterprises.
This series of motors adopt F-class insulation, temperature rise is assessed according to B-class insulation, rated voltage 3KV, 6KV, 10KV, rated frequency 50Hz, basic installation type is IMB3 structure, protection grade is IP23, IP44, IP54 cooling mode is IC01, IC11, IC21, IC31, IC611, IC616.
Conditions of use:
1. No more than 1000 meters above sea level.
2. Ambient air temperature, not more than 40 degrees Celsius.
Note: If the motor is designated to be used at an altitude of more than 1000m or ambient air temperature above or below 40 C, it shall be in accordance with the provisions of GB755-2008.
3. Ambient air temperature: for the motor with rolling bearings, it is - 15 C, for the motor with sliding bearings, it is 0 C, or according to the agreement.
4. The monthly average relative humidity is 90%, and the monthly average temperature is not higher than 25 C.
5. The deviation between the voltage and frequency of the power supply and the rated value during the operation of the motor shall be in accordance with the provisions of BG755-2008.